ABS Enclosures - Small to Medium size, IP65
| ||ABS is a good general purpose material for enclosures as it is easy to machine but having a limited resistance to ultra violet radiation is not recommended for prolonged use in direct sunlight. It has a good tolerance to seawater and most of the lower concentration acids used in an industrial environment. Neoprene rubber used as a seal has good resistance to oil and petroleum.|
The ABS enclosures listed below are available either with an opaque ABS cover or a clear polycarbonate cover (option K) The neoprene rubber seal is recessed in the cover. Captive stainless steel cover screws, together with the mounting holes at each corner, are external to the seal. Bosses in the base allow a DIN rail, circuit board or a mounting plate to be fitted. Enclosures can be supplied internally screened and with a conductive rubber seal to protect equipment from interference and/or reduce radiation (option EMC).
Light grey, similar to RAL 7035. Other colours to special order.
-40 to 80 C
IP65 to DIN40050
K = clear polycarbonate cover*
IS = socket cap cover screws
RD = knurled cover screws
EMC = internal screening and conductive seal.
*not available with MBT 341555FT or MBT 341510FT
TS = DIN rail (TS15, TS32, TS35)
M = plastic internal mounting plate
F = rubber feet (4 pieces)
GAM = pair of plastic hinges (loose)
WL = wall mounting brackets (4 pieces)