Cadlow EnclosuresMetal and Plastic Enclosures from CadlowTelephone 01379 898 810
Email us
Plastic Enclosures
Metal Enclosures

Custom Enclosures
Cadlow Company Profile
Contact Cadlow
Home
 

 

 

Plastic Enclosures with Aluminium Front Panel, IP65

Cadlow Catalogue | Plastic Enclosures |  Plastic Enclosures with Aluminium Front Panel, IP65

Plastic Enclosures with Aluminium Front Panel sealed to IP65  Plastic Enclosures with Aluminium Front Panel sealed to IP65

Enclosures moulded to a high standard in ABS or polycarbonate and ideal as sealed push button or indicator housings in a harsh environment. The captive stainless steel cover screws and the mounting holes at each corner are external to the seal. Bosses in the base allow circuit boards or a mounting plate to be fitted. The cover has a raised protective flange around the edge and set within this is a 1.5mm thick satin anodized aluminium panel secured from the inside and sealed by a recessed neoprene seal
to IP65. The front panel is ideally suited for mounting a membrane keypad.

Standard Colour:
Light grey RAL 7035. Other colours to special order.

Temperature Range:
ABS -40 to 80 C
Polycarbonate (with neoprene seals) -40 to 90 C Polycarbonate (with silicon seals) -40 to 125 C

Environmental Protection:
All enclosures comply with IP65 DIN40050

Accessories and Options:
SI = silicon rubber seals
M = plastic internal mounting plate.
TS = DIN rail (TS15, TS32 or TS35)
GAM = pair of plastic hinges (not fitted)
WL = wall mounting brackets (set of 4)



Cadlow Catalogue | Plastic Enclosures |  Plastic Enclosures with Aluminium Front Panel, IP65

  
Copyright Cadlow EnclosuresPrivacy PolicyDisclaimerTerms & ConditionsTelephone 01379 898 810Email info@cadlow.co.uk